3.5 Structures N-R
NameArrayAddFlags
NameArrayAddFlags record
NAAF_SET_DATA_ON_REPLACE :1
:15
NameArrayAddFlags end
NAAF_SET_DATA_ON_REPLACE
If replacing an existing name set, set data for the name to the data passed.
Library: chunkarr.def
NameArrayElement
NameArrayElement struct
NAE_meta RefElementHeader ;standard ElementArray header
NAE_data label byte ;data
NameArrayElement ends
The name itself immediately follows the byte of data.
Library: chunkarr.def
NameArrayHeader
NameArrayHeader struct
NAH_meta ElementArrayHeader
NAH_dataSize word
NameArrayHeader ends
This structure must be at the front of every name array. Since name arrays are special kinds of element arrays, the NameArrayHeader must itself begin with an ElementArrayHeader.
NAH_meta stores this element array header.
NAH_dataSize stores the size of the data section of each element in the name array.
Library: chunkarr.def
NameArrayMaxElement
NameArrayMaxElement struct
NAME_meta RefElementHeader
NAME_data byte NAME_ARRAY_MAX_DATA_SIZE dup (?)
NAME_name char NAME_ARRAY_MAX_NAME_SIZE dup (?)
NameArrayMaxElement ends
Library: chunkarr.def
NavigateCommonFlags
NavigateCommonFlags record
NCF_IS_COMPOSITE :1
NCF_IS_FOCUSABLE :1
NCF_IS_MENU_RELATED :1
NCF_IS_ROOT_NODE :1
:4
NavigateCommonFlags end
NCF_IS_COMPOSITE
Set this if calling from a composite object (is subclass of VisCompClass).
NCF_IS_FOCUSABLE
Set this if specific UI will allow this object to get the focus. If NCF_IS_COMPOSITE is also set, means the object itself will get the focus first, followed by its children, in the navigation order.
NCF_IS_MENU_RELATED
Set if this object is menu-related (menu button, or icon in header area).
NCF_IS_ROOT_NODE
Set if this node is the root level of the tree.
Library: Objects/visC.def
NavigateCommonParams
NavigateCommonParams struct
NCP_object optr
NCP_navFlags NavigateFlags
NCP_navCommonFlags NavigateCommonFlags
NCP_genericData lptr
NavigateCommonParams ends
NCP_object stores the object that originated the message. When returned, this entry stores the final recipient of the message.
NCP_genericData stores the chunk handle of generic instance data for the calling object, or zero if not there is no generic data. (This is used for checking for navigation hints on the object.)
Library: Objects/visC.def
NavigateFlags
NavigateFlags record
; reply flags
NF_COMPLETED_CIRCUIT :1
NF_REACHED_ROOT :1
:6
; command flags (MUST BE IN LOWER BYTE)
:1 ;reserved for future use
;(lines up with VTF_IS_COMPOSITE)
:1 ;reserved for future use (lines up with
; GS_ENABLED and NCF_FOCUSABLE)
NF_NAV_MENU_BAR :1
:1 ;reserved for future use(lines up with
;VTF_IS_WIN_GROUP and NCF_IS_ROOT)
NF_INITIATE_QUERY :1
NF_SKIP_NODE :1
NF_TRAVEL_CIRCUIT :1
NF_BACKTRACK_AFTER_TRAVELING :1
NavigateFlags end
NF_COMPLETED_CIRCUIT
This is set when this message is received at a node and the originating node (in ^lcx:dx) matches the recipient node, meaning we have travelled the entire circuit. Recursion ends at this point. This is useful for preventing infinite looping in cases where the circuit consists of 1 object, and is handy for error checking after objects have been added/removed from the WIN_GROUP.
NF_REACHED_ROOT
This might be useful for error checking. Is set as this message is received by the root (WIN_GROUP object, and is passed on to the first child.
NF_NAV_MENU_BAR
Set to navigate through items considered part or the menu bar area: menu buttons, icons in the header area, etc. Clear this flag to navigate through control-items in the window area.
NF_INITIATE_QUERY
When a MSG_SPEC_NAVIGATE_TO_NEXT_FIELD or MSG_SPEC_NAVIGATE_TO_NEXT_FIELD handler sends this query to an object, this flag is set, since the cx:dx passed are the object, and don’t want to get confused and think that we have already travelled the entire circuit. This flag is reset before the message is passed onto the next node in the circuit.
NF_SKIP_NODE
Set to tell the recipient to forward the message on to the next object in the circuit. if reset, and is composite, will forward message to first child. If leaf node, will forward to next sibling. If is last sibling, will forward to parent passing NF_SKIP_NODE set so that parent will forward to sibling or parent.
NF_TRAVEL_CIRCUIT
Set to force message to be passed through the entire navigation circuit, back to the originating object. This is useful for error checking, and for the “navigate to previous” case.
Library: Objects/visC.def
NCCFlagsUnion
NCCFlagsUnion union
NCCFU_char VisTextCharAttrFlags
NCCFU_paragraph VisTextParaAttrFlags
NCCFU_border VisTextParaAttrBorderFlags
NCCFlagsUnion ends
Library: Objects/Text/tCtrlC.def
NoteType
NoteType etype byte, 0, 2
NT_INK enum NoteType
NT_TEXT enum NoteType
Library: pen.def
NotificationType
NotificationType struct
NT_manuf ManufacturerID
NT_type word
NotificationType ends
This structure defines a basic GCN notification type that can be passed with MSG_META_NOTIFY and MSG_META_NOTIFY_WITH_DATA_BLOCK.
Library: Objects/metaC.def
NotifyColorChange
NotifyColorChange struct
NCC_color ColorQuad
NCC_grayScreen SystemDrawMask
NCC_pattern GraphicPattern
NCC_flags NCCFlagsUnion
;VTCAF_MULTIPLE_COLORS
;VTCAF_MULTIPLE_GRAY_SCREENS
;VTCAF_MULTIPLE_PATTERNS
; -or-
;VTCAF_MULTIPLE_BG_COLORS
;VTCAF_MULTIPLE_BG_GRAY_SCREENS
;VTCAF_MULTIPLE_BG_PATTERNS
; -or-
;VTPAF_MULTIPLE_BG_COLORS
;VTPAF_MULTIPLE_BG_GRAY_SCREENS
;VTPAF_MULTIPLE_BG_PATTERNS
; -or-
;VTPABF_MULTIPLE_BORDER_COLORS
;VTPABF_MULTIPLE_BORDER_GRAY_SCREENS
;VTPABF_MULTIPLE_BORDER_PATTERNS
NotifyColorChange ends
Library: Objects/Text/tCtrlC.def
NotifyDisplayChange
NotifyDisplayChange struct
NDC_displayNum word
NDC_name char MAX_DISPLAY_NAME_SIZE dup (?)
NDC_overlapping BooleanByte
NotifyDisplayChange ends
Library: Objects/gDCtrlC.def
NotifyDisplayListChange
NotifyDisplayListChange struct
NDLC_counter word
NDLC_group optr
NotifyDisplayListChange ends
Library: Objects/gDCtrlC.def
NotifyDocumentChange
NotifyDocumentChange struct
NDC_attrs GenDocumentAttrs
NDC_type GenDocumentType
NDC_fileHandle hptr
NDC_emptyExists BooleanByte
NDC_defaultExists BooleanByte
NotifyDocumentChange ends
Library: Objects/gDocCtrl.def
NotifyEnabledFlags
NotifyEnabledFlags record
NEF_STATE_CHANGING :1 ;this is the object whose state is changing
:7
NotifyEnabledFlags end
Library: Objects/genC.def
NotifyFloatFormatChange
NotifyFloatFormatChange struc
NFFC_vmFileHan word
NFFC_vmBlkHan word
NFFC_format word
NFFC_count word
NotifyFloatFormatChange ends
Library: math.def
NotifyFocusWindowKbdStatus
NotifyFocusWindowKbdStatus struct
NFWKS_needsFloatingKbd word
NFWKS_kbdPosition Point<>
NFWKS_focusWindow optr
NFWKS_sysModal word
NFWKS_needsFloatingKbd If non-zero, the window needs a floating keyboard - otherwise, it already has an embedded keyboard.
NFWKS_kbdPosition The position at which to display the keyboard
NFWKS_focusWindow The OD of the window with the focus. This is used by embedded keyboards, so they can enable themselves when their parent window has the focus.
NFWKS_sysModal Either zero if window is not sys-modal or 0xffff if it is
Library:
NotifyFontAttrChange
NotifyFontAttrChange struct
NFAC_fontWeight byte
NFAC_fontWeightDiffs byte
NFAC_fontWidth byte
NFAC_fontWidthDiffs byte
NFAC_trackKerning word
NFAC_trackKerningDiffs byte
NotifyFontAttrChange ends
Library: Objects/Text/tCtrlC.def
NotifyFontChange
NotifyFontChange struct
NFC_fontID FontID
NFC_diffs byte
NotifyFontChange ends
Library: Objects/Text/tCtrlC.def
NotifyGenControlStatusChange
NotifyGenControlStatusChange struct
NGCS_controller optr
NGCS_statusChange GenControlStatusChange
NotifyGenControlStatusChange ends
NGCS_controller stores the optr of the GenControl object itself. This optr may be used to send messages or fetch information from the GenControl (typically to add or remove features).
NGCS_statusChange stores the type of status change that the GenControl object has undergone.
Library: Objects/gCtrlC.def
NotifyInkHasTarget
NotifyInkHasTarget struct
NIHT_optr optr
NotifyInkHasTarget ends
This structure is sent to objects requesting GWNT_INK_HAS_TARGET notification.
Library: pen.def
NotifyJustificationChange
NotifyJustificationChange struct
NJC_justification Justification
NJC_diffs byte
NJC_useGeneral byte ;if non-zero then use "general" in place
;of "full" justification.
NotifyJustificationChange ends
Library: Objects/Text/tCtrlC.def
NotifyPageInfoChange
NotifyPageInfoChange struct
NPIC_width word
NPIC_height word
NPIC_rightMargin word ; 13.3 (8* actual value)
NPIC_leftMargin word ; 13.3 (8* actual value)
NPIC_topMargin word ; 13.3 (8* actual value)
NPIC_bottomMargin word ; 13.3 (8* actual value)
NotifyPageInfoChange ends
Library: pageInfo.def
NotifyPageStateChange
NotifyPageStateChange struct
NPSC_firstPage word ;first page
NPSC_lastPage word ;last page
NPSC_currentPage word ;current page
NotifyPageStateChange ends
Library: Objects/gPageCC.def
NotifyPointSizeChange
NotifyPointSizeChange struct
NPSC_pointSize WWFixed
NPSC_diffs byte
NotifyPointSizeChange ends
Library: Objects/Text/tCtrlC.def
NotifySearchReplaceEnableChange
NotifySearchReplaceEnableChange struct
NSREC_flags SearchReplaceEnableFlags
NotifySearchReplaceEnableChange ends
Library: Objects/Text/tCtrlC.def
NotifySelectStateChange
NotifySelectStateChange struct
NSSC_selectionType SelectionDataType
NSSC_clipboardableSelection BooleanByte
NSSC_selectAllAvailable BooleanByte
NSSC_deleteableSelection BooleanByte
NSSC_pasteable BooleanByte
NotifySelectStateChange ends
NSSC_selectionType determines if a text object has the target and a selection.
NSSC_clipboardableSelection stores BB_TRUE if a selection that can be copied to the clipboard exist.
NSSC_selectAllAvailable stores BB_TRUE if “select all” is allowed.
NSSC_deleteableSelection stores BB_TRUE if a selection that can be deleted exists.
NSSC_pasteable stores BB_TRUE if the current clipboard is “pasteable.”
Library: Objects/gEditCC.def
NotifyTextStyleChange
NotifyTextStyleChange struct
NTSC_styles TextStyle
NTSC_indeterminates TextStyle
NotifyTextStyleChange ends
Library: Objects/Text/tCtrlC.def
NotifyUndoStateChange
NotifyUndoStateChange struct
NUSC_undoTitle optr
NUSC_undoType UndoDescription
NotifyUndoStateChange ends
NUSC_undoTitle stores the title of the current undo item or 0:0 if there is no operation to undo.
Library: Objects/gEditCC.def
NotifyViewStateChange
NotifyViewStateChange struct
NVSC_origin PointDWFixed
NVSC_docBounds RectDWord
NVSC_increment PointDWord
NVSC_scaleFactor PointWWFixed
NVSC_color ColorQuad
NVSC_attrs GenViewAttrs
NVSC_horizAttrs GenViewDimensionAttrs
NVSC_vertAttrs GenViewDimensionAttrs
NVSC_inkType GenViewInkType
NVSC_contentSize XYSize
NVSC_contentScreenSize XYSize
NVSC_originRelative PointDWord
NVSC_documentSize PointDWord
NotifyViewStateChange ends
Library: Objects/gViewCC.def
NumberFormatFlags
NumberFormatFlags record
:7
NFF_LEADING_ZERO :1
NumberFormatFlags end
Library: localize.def
NumberType
NumberType etype byte, 0, 1
NT_VALUE enum NumberType ; It's just a number
NT_BOOLEAN enum NumberType ; It's a boolean
NT_DATE_TIME enum NumberType ; It's a date/time
Library: parse.def
ObjChunkFlags
ObjChunkFlags record
:3
OCF_VARDATA_RELOC :1
OCF_DIRTY :1
OCF_IGNORE_DIRTY :1
OCF_IN_RESOURCE :1
OCF_IS_OBJECT :1
ObjChunkFlags end
Library: object.def
ObjCompCallType
ObjCompCallType etype word, 0, 2
OCCT_SAVE_PARAMS_TEST_ABORT enum ObjCompCallType
OCCT_SAVE_PARAMS_DONT_TEST_ABORT enum ObjCompCallType
OCCT_DONT_SAVE_PARAMS_TEST_ABORT enum ObjCompCallType
OCCT_DONT_SAVE_PARAMS_DONT_TEST_ABORT enum ObjCompCallType
OCCT_ABORT_AFTER_FIRST enum ObjCompCallType
OCCT_COUNT_CHILDREN enum ObjCompCallType
Library: Objects/metaC.def
ObjectTransform
ObjectTransform struct
OT_center PointDWFixed
OT_width WWFixed
OT_height WWFixed
OT_parentWidth WWFixed
OT_parentHeight WWFixed
OT_transform GrObjTransMatrix
ObjectTransform ends
OT_center stores the center of the object in the parent’s coordinate system.
OT_width stores the width of object in the object’s coordinate system
OT_height stores the height of object in the object’s coordinate system.
OT_parentWidth stores the width of the object in the parent’s coordinate system. This width includes line width and can therefore be used for invalidation, etc.
OT_parentHeight stores the height of the object in the parent’s coordinate system. This height includes line height, etc. and can therefore be used for invalidation, etc.
Library: grobj.def
ObjFlushInputQueueNextStop
ObjFlushInputQueueNextStop etype word, 0, 2
OFIQNS_INPUT_MANAGER enum ObjFlushInputQueueNextStop
OFIQNS_SYSTEM_INPUT_OBJ enum ObjFlushInputQueueNextStop
OFIQNS_INPUT_OBJ_OF_OWNING_GEODE enum ObjFlushInputQueueNextStop
OFIQNS_PROCESS_OF_OWNING_GEODE enum ObjFlushInputQueueNextStop
OFIQNS_DISPATCH enum ObjFlushInputQueueNextStop
OFIQNS__INPUT_MANAGER
MF_FORCE_QUEUE message to the kernel’s input manager thread passing OFIQNS_INPUT_OBJ_OF_OWNING_GEODE.
OFIQNS_SYSTEM_INPUT_OBJ
MF_FORCE_QUEUE message to the System input object (usually the GenSystem object), passing OFIQNS_INPUT_OBJ_OF_OWNING_GEODE.
OFIQNS_INPUT_OBJ_OF_OWNING_GEODE
MF_FORCE_QUEUE message next to the InputObj of the geode owning the block that the object is in, passing OFIQNS_PROCESS_OF_OWNING_GEODE.
OFIQNS_PROCESS_OF_OWNING_GEODE
MF_FORCE_QUEUE message next to the process of the geode owning the block that the object is in, passing OFIQNS_DISPATCH.
OFIQNS_DISPATCH
Queues are flushed, so FORCE_QUEUE dispatch passed Event.
Library: Objects/metaC.def
ObjLMemBlockHeader
ObjLMemBlockHeader struct
OLMBH_header LMemBlockHeader <>
OLMBH_inUseCount word
OLMBH_interactibleCount word
OLMBH_output optr
OLMBH_resourceSize word
ObjLMemBlockHeader ends
This structure is the standard object block (resource) header that begins every object block. Since Object blocks are types of LMem blocks, the first entry in the ObjLMemBlockHeader must contain a LMemBlockHeader.
OLMBH_header stores the LMem block header.
OLMBH_inUseCount stores the “in use” count for this block. If this count is not zero, then the block may not safely be freed.
OLMBH_interactibleCount stores the “interactable” count for this block, which prevents the block from being swapped. If not zero, then one or more objects in the block are either visible to the user or about to be activated by the user (e.g. via keyboard shortcut).
OLMBH_output stores the optr of the object that will be notified about changes in the resource status, such as in-use counts changing to or from zero. Messages may be sent to this optr using the TravelOption TO_OBJ_BLOCK_OUTPUT.
OLMBH_resourceSize stores the size of the object block.
Library: object.def
ObjRelocation
ObjRelocation struct
OR_type ObjRelocationType ; Type of relocation
OR_offset word ; Offset to relocation
ObjRelocation ends
This is the structure of an object relocation table entry (for instance data).
Library: object.def
ObjRelocationID
ObjRelocationID record
RID_SOURCE ObjRelocationSource:4
RID_INDEX :12
ObjRelocationID end
Library: object.def
ObjRelocationSource
ObjRelocationSource etype byte
ORS_NULL enum ObjRelocationSource
ORS_OWNING_GEODE enum ObjRelocationSource
ORS_KERNEL enum ObjRelocationSource
ORS_LIBRARY enum ObjRelocationSource
ORS_CURRENT_BLOCK enum ObjRelocationSource
ORS_VM_HANDLE enum ObjRelocationSource
ORS_OWNING_GEODE_ENTRY_POINT enum ObjRelocationSource
ORS_NON_STATE_VM enum ObjRelocationSource
ORS_UNKNOWN_BLOCK enum ObjRelocationSource
ORS_EXTERNAL enum ObjRelocationSource
ORS_NULL
ObjRelocation to zero.
ORS_OWNING_GEODE
Resource of geode. index is resource ID
ORS_KERNEL
Kernel entry point
ORS_LIBRARY
Index is imported library number.
ORS_CURRENT_BLOCK
Handle of block.
ORS_VM_HANDLE
Reloc to handle of block saved on the saved list-index is a VM iD
ORS_OWNING_GEODE_ENTRY_POINT
Entry point of owner.
ORS_NON_STATE_VM
Index is a VM index, vm file handle stored in block header
ORS_UNKNOWN_BLOCK
Index is a handle»4
ORS_EXTERNAL
Internal.
Library: object.def
ObjRelocationType
ObjRelocationType etype byte
RELOC_END_OF_LIST enum ObjRelocationType
RELOC_HANDLE enum ObjRelocationType ;resource ID to handle
RELOC_SEGMENT enum ObjRelocationType ;resource ID to segment
RELOC_ENTRY_POINT enum ObjRelocationType ;resource ID/entry #
RELOC_END_OF_LIST
Relocation from resource ID to handle. The target contains the resource identification (described below)
RELOC_HANDLE
Relocation from resource ID to segment. The target contains the resource identification (described below)
RELOC_SEGMENT
Relocation from resource ID/entry point number to a far pointer. The low word of the target contains the resource identification and the high word of the target contains the entry point number.
RELOC_ENTRY_POINT
Resource ID/entry number.
Library: object.def
OldErrorCheckingFlags
OldErrorCheckingFlags record
OECF_REGION :1 ;Region checking
OECF_HEAP_FREE_BLOCKS :1 ;Ensure that all free blocks are 0xcccc
OECF_LMEM_INTERNAL :1 ;Internal lmem checking
OECF_LMEM_FREE_AREAS :1 ;Ensure that all free areas are 0xcccc
OECF_LMEM_OBJECT :1 ;Consistency checks on objects in lmem chunks
OECF_BLOCK_CHECKSUM :1 ;Checksum on a particular block
OECF_GRAPHICS :1 ;Misc graphics stuff
OECF_SEGMENT :1 ;Extensive segment checking
OECF_NORMAL :1 ;Misc kernel error checking
OECF_VMEM :1 ;VM file consistency
OECF_APP :1 ;Application error checking (if implemented
;by applications)
OECF_LMEM_MOVE :1 ;Force lmem blocks to move whenever possible
OECF_UNLOCK_MOVE :1 ;Force unlocked blocks to move
OECF_VMEM_DISCARD :1 ;Force clean VM blocks to be discarded
OECF_ANAL_VMEM :1 ;Extensive VM error checking
OECF_TEXT :1
OldErrorCheckingFlags end
Library: ec.def
OperatorStackElement
OperatorStackElement struct
OSE_type EvalStackOperatorType ; Type of the operator
OSE_data EvalStackOperatorData ; The associated data
OperatorStackElement ends
Library: parse.def
OperatorType
OperatorType etype byte, 0, 1
OP_RANGE_SEPARATOR enum OperatorType
OP_NEGATION enum OperatorType
OP_PERCENT enum OperatorType
OP_EXPONENTIATION enum OperatorType
OP_MULTIPLICATION enum OperatorType
OP_DIVISION enum OperatorType
OP_MODULO enum OperatorType
OP_ADDITION enum OperatorType
OP_SUBTRACTION enum OperatorType
OP_EQUAL enum OperatorType
OP_NOT_EQUAL enum OperatorType
OP_LESS_THAN enum OperatorType
OP_GREATER_THAN enum OperatorType
OP_LESS_THAN_OR_EQUAL enum OperatorType
OP_GREATER_THAN_OR_EQUAL enum OperatorType
;
;
OP_STRING_CONCAT enum OperatorType
OP_RANGE_INTERSECTION enum OperatorType
;
; The following are graphic versions of existing operators. For example,
; OP_NOT_EQUAL_GRAPHIC is the same as OP_NOT_EQUAL, but shows up on screen
; as an equals sign with a line through it.
;
OP_NOT_EQUAL_GRAPHIC enum OperatorType
OP_DIVISION_GRAPHIC enum OperatorType
OP_LESS_THAN_OR_EQUAL_GRAPHIC enum OperatorType
OP_GREATER_THAN_OR_EQUAL_GRAPHIC enum OperatorType
;
; The following are included here because it's convenient. They represent
; an as yet undecided operator. The scanner has seen it and recognized it.
; The parser will decide which operator it is.
;
; The problem is that a single lexical token can correspond to two different
; operations, depending on the context:
; Percent Operator:
; 9% <- Divides the value to the left by 100
; Modulo Operator:
; 9%2 <- Performs the operation "9 MOD 2"
; Negation Operator:
; -5 <- Negates the value to the right
; Subtraction Operator:
; 3-5 <- Performs the operation "3 MINUS 5"
;
; Since the scanner has no idea what is coming next in the input stream it
; can only return that the operator is undecided.
;
; These operators should always be the last in the list since none of the
; tables depend on them.
;
OP_PERCENT_MODULO enum OperatorType
OP_SUBTRACTION_NEGATION enum OperatorType
Library: parse.def
OriginChangedParams
OriginChangedParams struct
OCP_origin PointDWord ;new origin
OCP_window lptr Window ;window of view
OriginChangedParams ends
Library: Objects/gViewC.def
PACFeatures
PACFeatures record
PACF_WORD_WRAP :1
PACF_COLUMN_BREAK_BEFORE :1
PACF_KEEP_PARA_WITH_NEXT :1
PACF_KEEP_PARA_TOGETHER :1
PACF_KEEP_LINES :1
PACFeatures end
Library: Objects/Text/tCtrlC.def
PACToolboxFeatures
PACToolboxFeatures record
PACToolboxFeatures end
Library: Object/Text/tCtrlC.def
PageEndCommand
PageEndCommand etype byte
PEC_FORM_FEED enum PageEndCommand ; 0 = form feed
PEC_NO_FORM_FEED enum PageEndCommand ; 1 = no form feed
Library: graphics.def
PageLayout
PageLayout union
PL_paper PageLayoutPaper
PL_envelope PageLayoutEnvelope
PL_label PageLayoutLabel
PageLayout end
Library: spool.def
PageLayoutEnvelope
PageLayoutEnvelope record
:12
PLE_ORIENTATION EnvelopeOrientation:1
PLE_TYPE PageType:3 ; PT_ENVELOPE
PageLayoutEnvelope end
Library: spool.def
PageLayoutLabel
PageLayoutLabel record
:1
PLL_ROWS :6 ; labels down
PLL_COLUMNS :6 ; labels across
PLL_TYPE PageType:3 ; PT_LABEL
PageLayoutLabel end
Library: spool.def
PageLayoutPaper
PageLayoutPaper record
:12
PLP_ORIENTATION PaperOrientation:1
PLP_TYPE PageType:3 ; PT_PAPER
PageLayoutPaper end
Library: spool.def
PageSetupInfo
PageSetupInfo struct
PSI_meta VMChainLink
PSI_pageSize XYSize ; In pixels (points)
PSI_layout PageLayout
PSI_numColumns word
PSI_columnSpacing word ; In points * 8
PSI_ruleWidth word ; In pixels (points)
;
; The margins are relative to the edges of the page, and are in points * 8
;
PSI_leftMargin word
PSI_rightMargin word
PSI_topMargin word
PSI_bottomMargin word
PageSetupInfo ends
Library: Objects/vTextC.def
PageSizeControlAttrs
PageSizeControlAttrs record
; EXTERNAL
PZCA_ACT_LIKE_GADGET :1
PZCA_PAPER_SIZE :1
PZCA_INITIALIZE :1
:5
; INTERNAL
PZCA_NEW_PAGE_TYPE :1 ;INTERNAL
PZCA_SWAP_WIDTH_HEIGHT :1 ;INTERNAL
PZCA_SIZE_LIST_INITIALIZED :1 ;INTERNAL
PZCA_IGNORE_UPDATE :1 ;INTERNAL
PZCA_PORTRAIT_VALID :1
PZCA_LANDSCAPE_VALID :1
:2
PageSizeControlAttrs end
PZCA_ACT_LIKE_GADGET
Tells the PageSizeControl object to act like any other generic gadget, where one uses messages to set/get the state of the object.
PZCA_PAPER_SIZE
Tell the PageSizeControl to display paper, and not document, sizes. Most applications will not want this set.
PZCA_INITIALIZE
Initialize with the default system values. The flag PZCA_ACT_LIKE_GADGET must be set if you want to use this attribute.
Library: spool.def
PageSizeControlChanges
PageSizeControlChanges struct
PSCC_destination optr ; destination for message
PSCC_message word ; message to be sent
;
; Pass: SS:BP = PageSizeReport
; DX = size PageSizeReport
; Returns: Nothing
; AX, CX, DX, BP - may destroy
;
PageSizeControlChanges ends
Library: spool.def
PageSizeControlFeatures
PageSizeControlFeatures record
PSIZECF_MARGINS :1 ; not part of default features
PSIZECF_CUSTOM_SIZE :1
PSIZECF_LAYOUT :1
PSIZECF_SIZE_LIST :1
PSIZECF_PAGE_TYPE :1
PageSizeControlFeatures end
Library: spool.def
PageSizeControlMaxDimensions
PageSizeControlMaxDimensions struct
PZCMD_width dword ; maximum width
PZCMD_height dword ; maximum height
PageSizeControlMaxDimensions ends
Library: spool.def
PageSizeControlToolboxFeatures
PageSizeControlToolboxFeatures record
PSIZECTF_DIALOG_BOX :1
PageSizeControlToolboxFeatures end
Library: spool.def
PageSizeReport
PageSizeReport struct
PSR_width dword ; width of the page
PSR_height dword ; height of the page
PSR_layout PageLayout ; layout options
PSR_margins PCMarginParams ; document margins
PageSizeReport ends
Library: spool.def
PageType
PageType etype word, 0, 2
PT_PAPER enum PageType
PT_ENVELOPE enum PageType
PT_LABEL enum PageType
Library: print.def
Palette
Palette struct
P_entries word 16 ; Number of 3-byte entries in palette.
Palette ends
This structure stores the custom palettes allocated by GrCreatePalette and associated with windows.
Library: color.def
PaperOrientation
PaperOrientation etype byte, 0, 1
PO_PORTRAIT enum PaperOrientation
PO_LANDSCAPE enum PaperOrientation
Library: print.def
ParserFlags
ParserFlags record
;
; These are initialized by the parser. They are initialized to zero.
;
PF_HAS_LOOKAHEAD :1 ; The next token to get is the look-ahead
; token.
PF_CONTAINS_DISPLAY_FUNC :1 ; Set: This expression contains a function
; which should be evaluated when the
; result of the expression is displayed.
PF_OPERATORS :1 ; Set: Allow operators.
PF_NUMBERS :1 ; Set: Allow numbers.
PF_CELLS :1 ; Set: Allow cell references.
PF_FUNCTIONS :1 ; Set: Allow functions.
PF_NAMES :1 ; Set: Allow names.
PF_NEW_NAMES :1 ; Set: Allow new names (app only).
ParserFlags end
Library: parse.def
ParserParameters
ParserParameters struct
;
; Applications should initialize these fields before calling ParseString
;
PP_common CommonParameters <>
;
; Possible callbacks:
; CT_FUNCTION_TO_TOKEN
; CT_NAME_TO_TOKEN
;
PP_parserBufferSize word ; Size of the buffer
;
; Fields below this point are initialized by ParseString
;
PP_flags ParserFlags ; Parsing flags
PP_textPtr fptr.char ; Pointer to text
PP_currentToken ScannerToken ; Current token
PP_lookAheadToken ScannerToken ; Look ahead token
PP_error ParserScannerEvaluatorError
PP_tokenStart word ; Offset to start of token
PP_tokenEnd word ; Offset to end of token
ParserParameters ends
The parser allocates this structure on the stack when performing parsing operations such as ParseString.
Library: parse.def
ParserScannerEvaluatorError
ParserScannerEvaluatorError etype byte, 0, 1
;
; Scanner errors
;
PSEE_BAD_NUMBER enum ParserScannerEvaluatorError
PSEE_BAD_CELL_REFERENCE enum ParserScannerEvaluatorError
PSEE_NO_CLOSE_QUOTE enum ParserScannerEvaluatorError
PSEE_COLUMN_TOO_LARGE enum ParserScannerEvaluatorError
PSEE_ROW_TOO_LARGE enum ParserScannerEvaluatorError
PSEE_ILLEGAL_TOKEN enum ParserScannerEvaluatorError
;
; Parser errors
;
PSEE_GENERAL enum ParserScannerEvaluatorError
PSEE_TOO_MANY_TOKENS enum ParserScannerEvaluatorError
PSEE_EXPECTED_OPEN_PAREN enum ParserScannerEvaluatorError
PSEE_EXPECTED_CLOSE_PAREN enum ParserScannerEvaluatorError
PSEE_BAD_EXPRESSION enum ParserScannerEvaluatorError
PSEE_EXPECTED_END_OF_EXPRESSION enum ParserScannerEvaluatorError
PSEE_MISSING_CLOSE_PAREN enum ParserScannerEvaluatorError
PSEE_UNKNOWN_IDENTIFIER enum ParserScannerEvaluatorError
PSEE_NOT_ENOUGH_NAME_SPACE enum ParserScannerEvaluatorError
;
; Serious evaluator errors
;
PSEE_OUT_OF_STACK_SPACE enum ParserScannerEvaluatorError
PSEE_NESTING_TOO_DEEP enum ParserScannerEvaluatorError
;
; Evaluator errors that are returned as the result of formulas.
; These are returned on the argument stack.
;
PSEE_ROW_OUT_OF_RANGE enum ParserScannerEvaluatorError
PSEE_COLUMN_OUT_OF_RANGE enum ParserScannerEvaluatorError
PSEE_FUNCTION_NO_LONGER_EXISTS enum ParserScannerEvaluatorError
PSEE_BAD_ARG_COUNT enum ParserScannerEvaluatorError
PSEE_WRONG_TYPE enum ParserScannerEvaluatorError
PSEE_DIVIDE_BY_ZERO enum ParserScannerEvaluatorError
PSEE_UNDEFINED_NAME enum ParserScannerEvaluatorError
PSEE_CIRCULAR_REF enum ParserScannerEvaluatorError
PSEE_CIRCULAR_DEP enum ParserScannerEvaluatorError
PSEE_CIRC_NAME_REF enum ParserScannerEvaluatorError
PSEE_NUMBER_OUT_OF_RANGE enum ParserScannerEvaluatorError
PSEE_GEN_ERR enum ParserScannerEvaluatorError
PSEE_NA enum ParserScannerEvaluatorError
;
; Dependency errors
;
PSEE_TOO_MANY_DEPENDENCIES enum ParserScannerEvaluatorError
;
; Applications can define errors too, they start here.
;
PSEE_FIRST_APPLICATION_ERROR enum ParserScannerEvaluatorError, 0xc0
;
; !!! NOTE !!!
; These PSEE_ errors map directly to the floating point errors
; Any change in the float library errors require corresponding
; changes here.
;
PSEE_FLOAT_POS_INFINITY enum ParserScannerEvaluatorError, 250
PSEE_FLOAT_NEG_INFINITY enum ParserScannerEvaluatorError
PSEE_FLOAT_GEN_ERR enum ParserScannerEvaluatorError
Library: parse.def
ParserToken
ParserToken struct
PT_type ParserTokenType ; Type of token data
PT_data ParserTokenData ; The data itself
ParserToken ends
Library: parse.def
ParserTokenCellData
ParserTokenCellData struct
PTCD_cellRef CellReference <>
ParserTokenCellData ends
Library: parse.def
ParserTokenData
ParserTokenData union
PTD_number ParserTokenNumberData
PTD_string ParserTokenStringData
PTD_name ParserTokenNameData
PTD_cell ParserTokenCellData
PTD_function ParserTokenFunctionData
PTD_operator ParserTokenOperatorData
ParserTokenData end
Library: parse.def
ParserTokenFunctionData
ParserTokenFunctionData struct
PTFD_functionID word ; Identifier for the function
ParserTokenFunctionData ends
Library:
ParserTokenNameData
ParserTokenNameData struct
PTND_name word ; The token describing the name
ParserTokenNameData ends
Library: parse.def
ParserTokenNumberData
ParseTokenNumberData struct
PTND_value FloatNum <> ; 8 byte constant
ParseTokenNumberData ends
Library: parse.def
ParserTokenOperatorData
ParserTokenOperatorData struct
PTOD_operatorID OperatorType ; The operator ID.
ParserTokenOperatorData ends
Library: parse.def
ParserTokenStringData
ParserTokenStringData struct
PTSD_length word ; Length of the string
ParserTokenStringData ends
Library: parse.def
ParserTokenType
ParserTokenType etype byte, 0, 1
PARSER_TOKEN_NUMBER enum ParserTokenType
PARSER_TOKEN_STRING enum ParserTokenType
PARSER_TOKEN_CELL enum ParserTokenType
PARSER_TOKEN_END_OF_EXPRESSION enum ParserTokenType
PARSER_TOKEN_OPEN_PAREN enum ParserTokenType
PARSER_TOKEN_CLOSE_PAREN enum ParserTokenType
PARSER_TOKEN_NAME enum ParserTokenType
;
; All the items above are in common with the ScannerTokenType list.
; You can add or delete items below this point without changing
; the other table.
;
PARSER_TOKEN_FUNCTION enum ParserTokenType
PARSER_TOKEN_CLOSE_FUNCTION enum ParserTokenType
PARSER_TOKEN_ARG_END enum ParserTokenType
PARSER_TOKEN_OPERATOR enum ParserTokenType
Library: parse.def
PASCFeatures
PASCFeatures record
PASCF_SPACE_ON_TOP :1
PASCF_SPACE_ON_BOTTOM :1
PASCFeatures end
Library: Objects/Text/tCtrlC.def
PASCToolboxFeatures
PASCToolboxFeatures record
PASCToolboxFeatures end
Library: Objects/Text/tCtrlC.def
PathCombineType
PathCombineType etype word
PCT_NULL enum PathCombineType ; destroy current
PCT_REPLACE enum PathCombineType ; replace current
PCT_UNION enum PathCombineType ; add to current
PCT_INTERSECTION enum PathCombineType ; intersect with curr
Library: graphics.def
PathCompareType
PathCompareType etype byte
PCT_EQUAL enum PathCompareType
PCT_SUBDIR enum PathCompareType
PCT_UNRELATED enum PathCompareType
PCT_ERROR enum PathCompareType
PCT_EQUAL
The 2 paths are equal.
PCT_SUBDIR
Path 2 is a subdirectory of path 1.
PCT_UNRELATED
Either the 2 paths are unrelated, or path 1 is a subdirectory of path 2.
PCT_ERROR
Some error occurred while parsing one of the paths (i.e., one of the paths was not found, etc.).
Library: file.def
PatternType
PatternType etype byte
PT_SOLID enum PatternType
PT_SYSTEM_HATCH enum PatternType
PT_SYSTEM_BITMAP enum PatternType
PT_USER_HATCH enum PatternType
PT_USER_BITMAP enum PatternType
PT_CUSTOM_HATCH enum PatternType
PT_CUSTOM_BITMAP enum PatternType
PT_SOLID
Solid pattern. Passed in AH: Nothing.
PT_SYSTEM_HATCH
System-defined hatch pattern. Passed in AH: SystemHatch.
PT_SYSTEM_BITMAP
System-defined tiled bitmap. Passed in AH: SystemBitmap.
PT_USER_HATCH
User-defined hatch pattern. Passed in AH: 0-255.
PT_USER_BITMAP
User-defined tiled bitmap. Passed in AH: 0-255.
PT_CUSTOM_HATCH
Application-custom hatch pattern. Passed in AH: Nothing.
PT_CUSTOM_BITMAP
Appl-custom tiled bitmap.
Library: graphics.def
PCComInitFlags
PCComInitFlags record
PCCIF_NOTIFY_OUTPUT :1 ; notify caller of output
PCCIF_NOTIFY_EXIT :1 ; notify caller of remote exit
:14
PCComInitFlags end
Library: pccom.def
PCComReturnType
PCComReturnType etype byte
PCCRT_NO_ERROR enum PCComReturnType
PCCRT_CANNOT_LOAD_SERIAL_DRIVER enum PCComReturnType
PCCRT_CANNOT_CREATE_THREAD enum PCComReturnType
PCCRT_CANNOT_ALLOC_STREAM enum PCComReturnType
PCCRT_ALREADY_INITIALIZED enum PCComReturnType
Library: pccom.def
PCDocSizeParams
PCDocSizeParams struct
PCDSP_width dword (?) ; width of the document
PCDSP_height dword (?) ; height of the document
PCDocSizeParams ends
Library: spool.def
PCMarginParams
PCMarginParams struct
PCMP_left word (?) ; left margin
PCMP_top word (?) ; top margin
PCMP_right word (?) ; right margin
PCMP_bottom word (?) ; bottom margin
PCMarginParams ends
Library: print.def
PCProgressType
PCProgressType etype word, 0, 2
PCPT_PAGE enum PCProgressType ; change page number
PCPT_PERCENT enum PCProgressType ; change percent done
PCPT_TEXT enum PCProgressType ; change text message
Library: spool.def
PenInputDisplayType
PenInputDisplayType etype word
PIDT_KEYBOARD enum PenInputDisplayType
PIDT_CHAR_TABLE enum PenInputDisplayType
PIDT_CHAR_TABLE_SYMBOLS enum PenInputDisplayType
PIDT_CHAR_TABLE_INTERNATIONAL enum PenInputDisplayType
PIDT_CHAR_TABLE_MATH enum PenInputDisplayType
PIDT_CHAR_TABLE_CUSTOM enum PenInputDisplayType
PIDT_HWR_ENTRY_AREA enum PenInputDisplayType
Library: Objects/gPenICC.def
PLInit
PLInit struct
PLI_align byte
PLI_message word
PLI_point PointDWFixed
PLI_instructions PriorityListInstructions
PLI_maxElements word
PLI_class fptr.ClassStruct
PLInit ends
Library: grobj.def
Point
Point struct
P_x sword
P_y sword
Point ends
Library: graphics.def
PointDWFixed
PointDWFixed struct
PDF_x DWFixed
PDF_y DWFixed
PointDWFixed ends
This structure stores a point (in graphic coordinates) where each coordinate is in terms of a DWFixed value.
Library: graphics.def
PointDWord
PointDWord struct
PD_x sdword
PD_y sdword
PointDWord ends
This structure stores a point (in graphic coordinates) where each coordinate is in terms of a signed dword value.
Library: graphics.def
PointerDef
PointerDef struct
PD_width PointerDefWidth
PD_height byte
PD_hotX sbyte
PD_hotY sbyte
PointerDef ends
This structure defines a mouse pointer.
PD_width and PD_height store the width and height of the cursor, in points.
PD_hotX and PD_hotY store the horizontal and vertical offset to the “hot spot” of the pointer. These offsets are relative to the upper left corner of the pointer.
Library: graphics.def
PointerDefWidth
PointerDefWidth record
PDW_ALWAYS_SHOW_PTR :1
; flag, set in BUSY cursors & any other cursors that should be shown
; for status's sake, regardless of whether the ptr image is normally
; hidden or not (such as in keyboard-only or ink-only systems).
; Interpreted, implemented by Input Manager -- Video drivers should
; ignore.
PDW_WIDTH :7
; width of cursor
PointerDefWidth end
Library: graphics.def
PointerModes
PointerModes record
PM_HANDLES_RESIZE :1
PM_HANDLES_ROTATE :1
PM_POINTER_IS_ACTION_OBJECT :1
PointerModes end
Library: grobj.def
PointWBFixed
PointWBFixed struct
PWBF_x WBFixed
PWBF_y WBFixed
PointWBFixed ends
This structure stores a point (in graphic coordinates) where each coordinate is in terms of a WBFixed value.
Library: graphics.def
PointWWFixed
PointWWFixed struct
PF_x WWFixed
PF_y WWFixed
PointWWFixed ends
This structure stores a point (in graphic coordinates) where each coordinate is in terms of a WWFixed value.
Library: graphics.def
PrefAttributes
PrefAttributes record
PA_REBOOT_IF_CHANGED :1
PA_LOAD_IF_USABLE :1
PA_SAVE_IF_USABLE :1
PA_SAVE_IF_ENABLED :1
PA_SAVE_IF_CHANGED :1
:3
PrefAttributes end
PA_REBOOT_IF_CHANGED
This bit signals that changes in the state of this object, or this object’s children require a system reboot to take effect. In a PrefDialogClass object, if this bit is set, then all children will be queried for reboot status (using MSG_PREF_GET_REBOOT_INFO), and if a reboot is required, PrefMgr will be notified.
PA_LOAD_IF_USABLE
Load options only if this object is usable (this is ON by default).
PA_SAVE_IF_USABLE
Save options only if this object is usable (this is ON by default).
PA_SAVE_IF_ENABLED
Save options only if this object is enabled.
PA_SAVE_IF_CHANGED
Save options only if this object has changed.
Library: config.def
PrefDialogChangeType
PrefDialogChangeType etype word, 0
PDCT_OPEN enum PrefDialogChangeType
PDCT_CLOSE enum PrefDialogChangeType
PDCT_DESTROY enum PrefDialogChangeType
PDCT_RESTART enum PrefDialogChangeType
PDCT_SHUTDOWN enum PrefDialogChangeType
Library: config.def
PrefEnableData
PrefEnableData struct
PED_item word
PED_lptr lptr
PED_flags PrefEnableFlags
PrefEnableData ends
PED_item stores the identifier of the item that controls enabling/disabling of the object. If the identifier is GIGS_NONE, then the action will be performed if no items are selected.
PED_lptr stores a pointer to the object that is to be enabled or disabled.
Library: config.def
PrefEnableFlags
PrefEnableFlags record
PEF_DISABLE_IF_SELECTED :1
PEF_DISABLE_IF_NONE :1
:6
PrefEnableFlags end
PEF_DISABLE_IF_SELECTED
If set, disable the object if the associated item is selected, otherwise do the opposite.
PEF_DISABLE_IF_NONE
If this flag is set, then the PED_item field is ignored. Instead, the item group will disable the specified object if no items are selected-or if there are no items in the list.
Library: config.def
PrefInitFileFlags
PrefInitFileFlags record
PIFF_USE_ITEM_STRINGS :1
PIFF_USE_ITEM_MONIKERS :1
PIFF_APPEND_TO_KEY :1
:5
PrefInitFileFlags end
PIFF_USE_ITEM_STRINGS
If set, then the item group’s children must be of class PrefStringItemClass, and their strings will be used to interact with the init file.
PIFF_USE_ITEM_MONIKERS
If set, then the monikers of the items are used to interact with the init file.
PIFF_APPEND_TO_KEY
If set, the strings in this list will be added to strings that may already exist for this key.
Library: config.def
PrefInteractionAttrs
PrefInteractionAttrs record
PIA_LOAD_OPTIONS_ON_INITIATE :1
PIA_SAVE_OPTIONS_ON_APPLY :1
:6
PrefInteractionAttrs end
PIA_LOAD_OPTIONS_ON_INITIATE
If set, then the dialog will send MSG_PREF_INIT, followed by MSG_META_LOAD_OPTIONS to itself when it receives a MSG_GEN_INTERACTION_INITIATE.
PIA_SAVE_OPTIONS_ON_APPLY
This flag is normally OFF, to allow non-dialog prefInteraction objects to reside inside other interactions without duplicate SAVE_OPTIONS messages being sent. This flag is normally on for objects of PrefDialogClass.
Library: config.def
PrefItemGroupStringVars
PrefItemGroupStringVars struct
PIGSV_endPtr nptr.char
PIGSV_selections word PREF_ITEM_GROUP_MAX_SELECTIONS dup (?)
PIGSV_numSelections word
PIGSV_buffer char PREF_ITEM_GROUP_STRING_BUFFER_SIZE dup (?)
Library: config.def
PrefMgrFeatures
PrefMgrFeatures record
PMF_HARDWARE :1
PMF_SYSTEM :1
PMF_NETWORK :1
PMF_USER :1
:12
PrefMgrFeatures end
PMF_HARDWARE
These settings are for a user who has permissions to actually change the configuration of the workstation. In a network environment where users log in to different machines at different times, normal users would be prevented from changing the mouse & video drivers, etc.
PMF_SYSTEM
These changes are more complex & potentially more damaging than the basic “user” changes, therefore, some users may be prevented from using these settings.
PMF_NETWORK
Network settings - generally only the system administrator will see these settings.
PMF_USER
These are basic user changes - normally this flag works the opposite way of the other flags - by default all UI is “on”, but if the user flag is off, then some basic UI might go away. This would allow a network administrator, for example, to look at a scaled-down, “network-only” prefmgr.
Library: config.def
PrefModuleEntryType
PrefModuleEntryType etype word, 0, 1
PMET_FETCH_UI enum PrefModuleEntryType
;
; Return the OD of the top-most object in the UI tree.
; All UI *must* be in the same segment as this object. The UI tree
; will be duplicated by the application, and added to the app's
; generic tree.
;
; Pass: nothing
; Return: ^ldx:ax - OD of root of UI tree.
; Destroy: nothing
;
PMET_GET_MODULE_INFO enum PrefModuleEntryType
; Return information about this module that will be used to determine
; whether to display it on-screen, what it will look like, etc.
;
; Pass: ds:si - pointer to a PrefModuleInfo buffer to be filled in
; Return: -- buffer filled in
; Destroy: ax, bx
;
Entry points for the Preferences Modules. Each module (library) must have the following routines exported in its .gp file, in the following order, as the first routines exported from that library.
Library: config.def
PrefModuleInfo
PrefModuleInfo struct
PMI_requiredFeatures PrefMgrFeatures <>
; Features that MUST be set for this module to appear in PrefMgr
PMI_prohibitedFeatures PrefMgrFeatures <>
; Features that MUST NOT be set for this module to appear.
PMI_minLevel UIInterfaceLevel 0
; Minimum user level required for this module to appear.
; Currently not implemented by PrefMgr -- should be set to zero by
; module.
PMI_maxLevel UIInterfaceLevel UIInterfaceLevel
; Minimum user level required for this module to appear.
; Currently not implemented by PrefMgr. Should be set to
; the maximum value by module.
PMI_monikerList optr
; Moniker list in a shared, lmem, read-only resource that will be
; used as the module's trigger
PMI_monikerToken GeodeToken
; A unique GeodeToken that will be used to enter the module's
; moniker list into the token database. This is done so that the
; module is only called with PMET_GET_MODULE_INFO the first time
; it is encountered by PrefMgr - all subsequent times, the
; necessary information is cached.
PrefModuleInfo ends
Library: config.def
PrefTimeDateControlFeatures
PrefTimeDateControlFeatures record
PTDCF_DATE :1
PTDCF_TIME :1
PrefTimeDateControlFeatures end
Library: config.def
PrefTimeDateControlScreen
PrefTimeDateControlScreen etype word, 0, 2
PTDCS_TIME_DATE enum PrefTimeDateControlScreen
Library: config.def
PrefTocExtraEntry
PrefTocExtraEntry struct
PTEE_item lptr.char
PTEE_driver lptr.char
PTEE_info word
PrefTocExtraEntry ends
PTEE_item stores the lptr of the item name. For device lists, this is the device. For others, this is the filename.
PTEE_driver stores the driver name (for device lists only).
PTEE_info stores an extra word of information.
Library: config.def
PrefTriggerAction
PrefTriggerAction struct
PTA_message word
PTA_dest optr
PrefTriggerAction ends
Library: config.def
PrefVMMapBlock
PrefVMMapBlock struct
PVMMB_root fptr
PrefVMMapBlock ends
Map block for a VM file this object can handle.
PVMMB_root is the root of the object tree contained in the VM file. Segment portion is VM block handle
Library: config.def
PrintControlAttrs
PrintControlAttrs record
:1
PCA_SEE_IF_DOC_WILL_FIT :1 ; check if document will fit on paper
PCA_MARK_APP_BUSY :1 ; mark busy while application is printing
PCA_VERIFY_PRINT :1 ; indicate we want to verify before
; printing
PCA_SHOW_PROGRESS :1 ; show the print progress dialog box
PCA_PROGRESS_PERCENT :1 ; show progress by percentage completed
PCA_PROGRESS_PAGE :1 ; show progress by page completed
PCA_FORCE_ROTATION :1 ; Force rotation of output
PCA_COPY_CONTROLS :1 ; Copy controls are available
PCA_PAGE_CONTROLS :1 ; Page range controls are available
PCA_QUALITY_CONTROLS :1 ; Print quality controls are available
PCA_USES_DIALOG_BOX :1 ; A print dialog box should appear
PCA_GRAPHICS_MODE :1 ; Supports graphics mode output
PCA_TEXT_MODE :1 ; Supports text mode output
PCA_DEFAULT_QUALITY PrintQualityEnum:2 ; default print quality
PrintControlAttrs end
Library: spool.def
PrintControlFeatures
PrintControlFeatures record
PRINTCF_PRINT_TRIGGER :1 ; wants a print trigger
PRINTCF_FAX_TRIGGER :1 ; wants a fax trigger
PrintControlFeatures end
Library: spool.def
PrintControlStatus
PrintControlStatus etype word
PCS_PRINT_BOX_VISIBLE enum PrintControlStatus ; Print DB is on screen
PCS_PRINT_BOX_NOT_VISIBLE enum PrintControlStatus ; Print DB not on screen
Library: spool.def
PrintControlToolboxFeatures
PrintControlToolboxFeatures record
PRINTCTF_PRINT_TRIGGER :1 ; wants a print tool trigger
PRINTCTF_FAX_TRIGGER :1 ; wants a fax tool trigger
PrintControlToolboxFeatures end
Library: spool.def
PrinterDriverType
PrinterDriverType etype byte, 0
PDT_PRINTER enum PrinterDriverType
PDT_PLOTTER enum PrinterDriverType
PDT_FACSIMILE enum PrinterDriverType
PDT_CAMERA enum PrinterDriverType
PDT_OTHER enum PrinterDriverType
PDT_ALL equ -1 ; all printers of all types
Library: print.def
PrinterMode
PrinterMode etype byte, 0, 2
PM_GRAPHICS_LOW_RES enum PrinterMode ; lowest quality...fastest...
PM_GRAPHICS_MED_RES enum PrinterMode ; medium quality...slower...
PM_GRAPHICS_HI_RES enum PrinterMode ; best quality...slowest...
PM_TEXT_DRAFT enum PrinterMode ; fastest ascii output
PM_TEXT_NLQ enum PrinterMode ; best quality ascii output
PM_FIRST_TEXT_MODE equ PM_TEXT_DRAFT ; equate to make the code easier
Library: print.def
PrinterOutputModes
PrinterOutputModes record
POM_unused :3 ; leave these bits alone!!!
POM_GRAPHICS_LOW :1 ; Graphics mode low quality available
POM_GRAPHICS_MEDIUM :1 ; Graphics mode medium quality available
POM_GRAPHICS_HIGH :1 ; Graphics mode high quality available
POM_TEXT_DRAFT :1 ; Character mode draft quality available
POM_TEXT_NLQ :1 ; Character mode NLQ quality available
PrinterOutputModes end
Library: spool.def
PrintQualityEnum
PrintQualityenum etype byte, 0, 1
PQT_HIGH enum PrintQualityenum ; default to high
PQT_MEDIUM enum PrintQualityenum ; default to medium
PQT_LOW enum PrintQualityenum ; default to low
Library: spool.def
PrintStatusFlags
PrintStatusFlags record
PSF_FAX_AVAILABLE :1 ; set if a fax driver is available
:3
PSF_ABORT :1 ; user wants to abort printing
PSF_RECEIVED_COMPLETED :1 ; MSG_PC_PRINTING_COMPLETED received
PSF_RECEIVED_NAME :1 ; MSG_PC_SET_DOC_NAME received
PSF_VERIFIED :1 ; PSG_PC_VERIFY_? received
PrintStatusFlags end
Library: spool.def
PriorityList
PriorityList struct
PL_message word
PL_point PointDWFixed
PL_instructions PriorityListInstructions
PL_class fptr.ClassStruct
PL_numElements word
PL_maxElements word
PL_list lptr
PriorityList ends
PL_message stores the method to send to each object.
PL_point stores the document coordinates to be examined by the object.
PL_instructions stores the instructions for the processing of objects.
PL_class stores the class of object to be used (based on the specific instructions passed in PL_instructions).
PL_numElements stores the number of elements currently in the list.
PL_maxElements stores the maximum number of elements allowed in the list.
PL_list stores the chunk handle of the list chunk array.
Library: grobj.def
PriorityListElement
PriorityListElement struct
PLE_od optr
PLE_priority byte
PLE_other byte
PriorityListElement ends
Library: grobj.def
PriorityListInstructions
PriorityListInstructions record
PLI_CHECK_SELECTION_HANDLE_BOUNDS :1
PLI_ONLY_PROCESS_SELECTED :1
PLI_ONLY_PROCESS_CLASS :1
PLI_ONLY_INSERT_CLASS :1
PLI_STOP_AT_FIRST_HIGH :1
PLI_ONLY_INSERT_HIGH :1
PLI_DONT_INSERT_OBJECTS_WITH_SELECTION_LOCK :1
PriorityListInstructions end
PLI_CHECK_SELECTION_HANDLE_BOUNDS
Do trivial reject check on bounds of objects that include the selection handles, instead of the normal parent bounds which are only guaranteed to surround the image.
PLI_ONLY_PROCESS_SELECTED
Only send messages to objects that are in selection list.
PLI_ONLY_PROCESS_CLASS
Only send messages to objects of class.
PLI_ONLY_INSERT_CLASS
Only insert items of class into priority list.
PLI_STOP_AT_FIRST_HIGH
Stop processing children after an object evaluates high.
PLI_ONLY_INSERT_HIGH
Only insert objects that evaluate high.
PLI_DONT_INSERT_OBJECTS_WITH_SELECTION_LOCK
Don’t insert objects that have their selection lock set. These objects must return EPN_SELECTION_LOCK_SET.
Library: grobj.def
ProcessCallRoutineParams
ProcessCallRoutineParams struct PCRP_address fptr PCRP_dataAX word PCRP_dataBX word PCRP_dataCX word PCRP_dataDX word PCRP_dataSI word PCRP_dataDI word ProcessCallRoutineParams ends
Library: processC.def
ProtocolNumber
ProtocolNumber struct
PN_major word
PN_minor word
ProtocolNumber ends
This structure defines the protocol level of a file, geode, or document.
PN_major represents the most significant compatibility comparisons. If the major protocol is different between two items, they are incompatible.
PN_minor represents less significant differences. If minor protocols are different, the two items may or may not be compatible.
Library: geode.def
PSCFeatures
PSCFeatures record
PSCF_9 :1
PSCF_10 :1
PSCF_12 :1
PSCF_14 :1
PSCF_18 :1
PSCF_24 :1
PSCF_36 :1
PSCF_54 :1
PSCF_72 :1
PSCF_SMALLER :1
PSCF_LARGER :1
PSCF_CUSTOM_SIZE :1 PSCFeatures end
Library: Objects/Text/tCtrlC.def
PSCToolboxFeatures
PSCToolboxFeatures record
PSCTF_9 :1
PSCTF_10 :1
PSCTF_12 :1
PSCTF_14 :1
PSCTF_18 :1
PSCTF_24 :1
PSCTF_36 :1
PSCTF_54 :1
PSCTF_72 :1
PSCTF_SMALLER :1
PSCTF_LARGER :1
PSCToolboxFeatures end
Library: Objects/Text/tCtrlC.def
PtrImageLevel
PtrImageLevel etype word, 0
PIL_SYSTEM enum PtrImageLevel
PIL_1 enum PtrImageLevel
PIL_FLOW enum PtrImageLevel
PIL_3 enum PtrImageLevel
PIL_GEODE enum PtrImageLevel
PIL_5 enum PtrImageLevel
PIL_GADGET enum PtrImageLevel
PIL_7 enum PtrImageLevel
PIL_WINDOW enum PtrImageLevel
PIL_DEFAULT enum PtrImageLevel
Enumerated type for ptr image level. Each level may specify a particular mouse ptr image, or specify that the level does not currently have an image. The first (starting at lowest enumerated value) level which has a ptr image declared will be used at any given moment in time.
PIL_SYSTEM
PIL_1
PIL_FLOW
Used for UI quick transfer move/copy cursors.
PIL_3
PIL_GEODE
Overriding status of geode. Used to indicate busy state, modal state for applications. Applications and the UI should use WinSetGeodePtrImage to set the image.
PIL_5
PIL_GADGET
Gadget level. Used for visible gadgets within windows, such as text object, control points, etc. Applications and the UI should use WinSetGeodePtrImage to set the image.
PIL_7
PIL_WINDOW
Window level. Background cursor to use. Applications and the UI should use WinSetGeodePtrImage to set the image.
PIL_DEFAULT
Default pointer.
Library: win.def
PtrImageValue
PtrImageValue etype word
PIV_NONE enum PtrImageValue, 0
PIV_VIDEO_DRIVER_DEFAULT enum PtrImageValue
PIV_UPDATE enum PtrImageValue
Enumerated type passed as an alternative to an optr to a PointerDef.
PIV_NONE
No ptr image requested for level. Important: Keep the value of this enumerated constant to 0, so that a null optr results in no ptr image being requested.
PIV_VIDEO_DRIVER_DEFAULT
Use video driver default ptr image.
PIV_UPDATE
Re-write current highest priority ptr image to the video driver. Useful when changing PointerDef at previous optr, changing screens.
Library: win.def
QuickSortParameters
QuickSortParameters struct
QSP_compareCallback fptr ; Compare two elements
;
; Pass:
; ds:si - first array element
; es:di - second array element
; bx - parameter passed to ArrayQuickSort
; Return:
; flags set so caller can jl, je, or jg
; according as first element is less than,
; equal to, or greater than the second.
; Destroyed:
; ax, bx, cx, dx, di, si
;
QSP_lockCallback fptr ; Lock an element (segment = 0, for none)
;
; Pass:
; ds:si - array element to lock
; bx - parameter passed to ArrayQuickSort
; Return:
; nothing
; Destroyed:
; nothing
;
QSP_unlockCallback fptr ; Unlock an element (segment = 0, for none)
;
; Pass:
; ds:si - array element to unlock
; bx - parameter passed to ArrayQuickSort
; Return:
; nothing
; Destroyed:
; nothing
;
QSP_insertLimit word
QSP_medianLimit word
;
; These are used internally by the quicksort algorithm and should not
; be set by the caller.
;
QSP_nLesser word
QSP_nGreater word
align word
QuickSortParameters ends
QSP_insertLimit stores the size of the list below which we choose to use insertion sort and not quicksort.
QSP_medianLimit stores the size of list below which we no longer choose the median but instead use the first key.
QSP_nLesser and QSP_nGreater store the number of elements in the lesser and greater list parts. This is used internally by the quicksort algorithm.
Library: chunkarr.def
QuitLevel
QuitLevel etype word
QL_BEFORE_UI enum QuitLevel
QL_UI enum QuitLevel
QL_AFTER_UI enum QuitLevel
QL_DETACH enum QuitLevel
QL_AFTER_DETACH enum QuitLevel
QL_BEFORE_UI
Quit message sent out before MSG_META_QUIT messages are sent to the items on the active list.
QL_UI
Default handler for this method sends MSG_META_QUIT to the application object for the process.
QL_AFTER_UI
Quit message sent out before MSG_META_DETACH is sent to the process.
QL_DETACH
Default handler for this method sends MSG_META_DETACH to the process.
QL_AFTER_DETACH
Default handler for this method doesn’t really do anything. Why is it still around? You’ll understand when you’re older.
Library: Objects/metaC.def
RandomGenInitFlags
RandomGenInitFlags record
RGIF_USE_SEED :1
RGIF_GENERATE_SEED :1
:6
RandomGenInitFlags end
Library: math.def
RangeEnumFlags
RangeEnumFlags record
REF_ALL_CELLS :1 ; Set: callback for all cells.
REF_NO_LOCK :1 ; Set: callback will lock/unlock cells.
REF_ROW_FLAGS :1 ; Set: get row flags when calling back
REF_MATCH_ROW_FLAGS :1 ; Set: callback for cells w/matching row
; flags
;
; These next ones are returned from the callback routine.
;
REF_CELL_ALLOCATED :1 ; Set: The callback routine allocated the
; cell for which the callback occurred.
REF_CELL_FREED:1 ; Set: The callback routine freed the cell
; for which the callback occurred.
REF_OTHER_ALLOC_OR_FREE :1 ; Set: The callback routine may have
; allocated or freed a cell other than the
; one for which the callback occurred.
REF_ROW_FLAGS_MODIFIED :1 ; Set: The callback routine changed
; the row flags
RangeEnumFlags end
Library: cell.def
RangeEnumParams
RangeEnumParams struct
REP_callback fptr.far ;routine to call
REP_bounds Rectangle ;cells to enumerate
;
; Stuff below this point is filled in by RangeEnum() and can be
; used by the callback.
;
REP_rowFlags word ;current row flags
;
; Stuff below this point is setup by RangeEnum(). Applications don't
; need to worry about it.
;
REP_cfp fptr.CellFunctionParameters
;
; Stuff below this point is only used with REF_MATCH_ROW_FLAGS
;
REP_matchFlags word ;flags to match
REP_flagRow word ;row we locked for flags
RangeEnumParams ends
This structure is used most often by the RangeEnum routine. In this case, the structure defines how the enumeration will occur.
Occasionally, however, an empty RangeEnumParams structure may be passed along with the CellGetExtent routine. In that case, the routine will fill in the REP_bounds entry.
REP_callback stores the routine to perform the enumeration.
REP_bounds stores the range of the cells to perform the enumeration on.
REP_rowFlags stores the “row flags” associated with a specific cell. During the enumeration, this entry holds the row flags of the most recently processed cell. These flags (4 bits in total) are able to provide custom information about cells.
REP_cfp and REP_matchFlags are set up automatically by RangeEnum. (REP_cfp stores the address of the CellFunctionParameters structure.)
Library: cell.def
RangeInsertParams
RangeInsertParams struct
RIP_bounds Rectangle
RIP_delta Point
RIP_cfp dword
RangeInsertParams ends
This structure is used by the RangeInsert routine, which shifts a group of cells from one position to another.
RIP_bounds stores the range of cells to shift.
RIP_delta stores the Point value which specifies the horizontal and vertical distance to shift the group of cells.
RIP_cfp stores the address of the CellFunctionParameters structure; this entry is set up automatically by the routine.
Library: cell.def
RangeSortCellExistsFlags
RangeSortCellExistsFlags record
:6 ; Unused bits
RSCEF_SECOND_CELL_EXISTS :1 ; Set: Second cell exists
RSCEF_FIRST_CELL_EXISTS :1 ; Set: First cell exists
RangeSortCellExistsFlags end
Library: cell.def
RangeSortError
RangeSortError etype word, 0, 1
RSE_NO_ERROR enum RangeSortError
RSE_UNABLE_TO_ALLOC enum RangeSortError
RSE_NO_ERROR
No error, the sort was successful.
RSE_UNABLE_TO_ALLOC
The sorting code was unable to allocate the temporary block it needs to sort the data.
Library: cell.def
RangeSortFlags
RangeSortFlags record
RSF_SORT_ROWS :1 ; Set: Sort rows
RSF_SORT_ASCENDING :1 ; Set: Sort in ascending order
RSF_IGNORE_CASE :1 ; Set: Ignore case in string compares
:4
RSF_IGNORE_SPACES :1 ; Set: Ignore spaces & punctuation
; NOTE: this is not supported directly
; by the Cell library, but is placed
; here for the convenience of apps.
RangeSortFlags end
Library: cell.def
RangeSortParams
RangeSortParams struct
RSP_range Rectangle
RSP_active Point
RSP_callback dword ; Comparison routine
;
; Callback is defined as:
; PASS: ds:si = Pointer to first cells data
; es:di = Pointer to second cells data
; ax = RangeSortCellExistsFlags
; ss:bx = Parameters passed to RangeSort
; RETURN: Flags set for comparison of the two cells
; DESTROYED: cx, dx, di, si, bp
;
RSP_flags RangeSortFlags
align word
;
; The rest is used in RangeSort and should be ignored.
;
RSP_cfp dword
RSP_sourceChunk word
RSP_destChunk word
RSP_base word
RSP_lockedEntry dword
RSP_cachedFlags byte
align word
RangeSortParams ends
RSP_range stores the rectangular range to conduct the sort on.
RSP_active stores the cell in the row/column that the current sort is acting upon.
RSP_flags stores the RangeSortFlags used in the sorting operation.
RSP_cfp stores the CellFunctionParameters.
RSP_sourceChunk stores the source row chunk for swapping.
RSP_destChunk stores the destination chunk for swapping.
RSP_base stores the base row/column for sort block.
RSP_lockedEntry stores the entry that is currently locked. If the segment is -1, nothing is locked.
RSP_cachedFlags stores the flags (carry set if cell exists).
Library: cell.def
RecalcSizeArgs
RecalcSizeArgs record
RSA_CHOOSE_OWN_SIZE :1
RSA_SUGGESTED_SIZE :15
RecalcSizeArgs end
RSA_CHOOSE_OWN_SIZE
Geometry manager wants object to choose its own size, typically objects will use current size if any, or choose an initial size, is coming up for the first time.
RSA_SUGGESTED_SIZE
Suggested size to use, if above bit is not set.
Library: Objects/visC.def
Rectangle
Rectangle struct
R_left sword
R_top sword
R_right sword
R_bottom sword
Rectangle ends
This is the standard structure for a rectangle in GEOS.
Library: graphics.def
RectDWFixed
RectDWFixed struct
RDWF_left DWFixed
RDWF_top DWFixed
RDWF_right DWFixed
RDWF_bottom DWFixed
RectDWFixed ends
Library: bitmap.def
RectDWord
RectDWord struct
RD_left sdword
RD_top sdword
RD_right sdword
RD_bottom sdword
RectDWord ends
This is the standard structure for a rectangle in extended coordinates.
Library: graphics.def
RectRegion
RectRegion struct
RR_y1M1 word
RR_eo1 word EOREGREC
RR_y2 word
RR_x1 word
RR_x2 word
RR_eo2 word EOREGREC
RR_eo3 word EOREGREC
RectRegion ends
This structure stores a rectangular region.
Library: graphics.def
RectWWFixed
RectWWFixed struct
RWWF_left WWFixed
RWWF_top WWFixed
RWWF_right WWFixed
RWWF_bottom WWFixed
RectWWFixed ends
Library: grobj.def
RefElementHeader
RefElementHeader struct
REH_refCount WordAndAHalf
RefElementHeader ends
This structure defines a header for an element of a fixed size.
Library: chunkarr.def
Region
Region struct
R_data word
Region ends
EOREGREC = 8000h
This structure stores a region of a graphics coordinate space. A region is of arbitrary length and consists of a series of word-length values.
Regions are described in terms of a rectangular array (thus the similarity to bitmaps). Instead of specifying an on/off value for each pixel, however, regions assume that the area will be fairly undetailed and that the data structure can thus be treated in the manner of a sparse array. Only the cells in which the color value of a row changes are recorded. The tricky part here is keeping in mind that when figuring out whether or not a row is the same as a previous row; the system works its way up from the bottom, so that you should compare each row with the row beneath it to determine whether it needs an entry.
The easiest region to describe is the null region, which is a special case described by a single word with the value EOREGREC (which stands for End Of REGion RECord value). Describing a non-null region requires several numbers.
The first four words of the region (starting with R_data) give the (rectangular) bounds of the region. What follows is a series of one or more numbers. Each word-length entry describes a row, specifying which pixels of that row are part of the region. The only rows which need to be described are those which are different
Library: graphics.def
RegionFillRule
RegionFillRule etype byte
RFR_ODD_EVEN enum RegionFillRule ; 0 = odd-even rule
RFR_WINDING enum RegionFillRule ; 1 = winding rule
Library: graphics.def
ReleaseNumber
ReleaseNumber struct
RN_major word
RN_minor word
RN_change word
RN_engineering word
ReleaseNumber ends
This structure stores the release number (version) of a file, document or geode.
RN_major stores the major release number. Different major release numbers signify a considerable version difference.
RN_minor stores the minor release version. Different minor release numbers typically mean a minor version “tweaking” of the system.
RN_change and RN_engineering are internal release numbers that should not need to be examined or changed.
Library: geode.def
ReplaceAllFromOffsetFlags
ReplaceAllFromOffsetFlags record
RAFOF_CONTINUING_REPLACE :1
RAFOF_HAS_UNDO :1
:14
ReplaceAllFromOffsetFlags end
RAFOF_CONTINUING_REPLACE
Set if this message was generated to continue a replace all sent to a different object.
RAFOF_HAS_UNDO
Set if this action will be undoable - mainly used for error-checking, to ensure that all objects involved in a ReplaceAll are undoable.
Library: Objects/vTextC.def
ReplaceAllFromOffsetStruct
ReplaceAllFromOffsetStruct struct
RAFOS_data hptr.SearchReplaceStruct
RAFOS_startOffset dword
RAFOS_flags ReplaceAllFromOffsetFlags
ReplaceAllFromOffsetStruct ends
RAFOS_data stores a pointer to the replace-all data. The data is organized in the following format: SearchReplaceStruct<>
data - Null-Terminated Search string
data - Null-Terminated Replace string
Note: The sender of this message is responsible for freeing the passed SearchReplaceStruct.
RAFOS_startOffset stores the offset in this object to begin the replace all operation.
RAFOS_flags stores flags that are set internally by the text object; do not set them.
Library: Objects/vTextC.def
ReplaceAllInRangeStruct
ReplaceAllInRangeStruct struct
RAIRS_data hptr.SearchReplaceStruct
RAIRS_range VisTextRange <>
ReplaceAllInRangeStruct ends
RAIRS_data stores a pointer to the replace-all data. The data is organized in the following format: SearchReplaceStruct<>
data - Null-Terminated Search string
data - Null-Terminated Replace string
Note: The sender of this message is responsible for freeing the passed SearchReplaceStruct.
Library: Objects/vTextC.def
ReplaceItemMonikerFlags
ReplaceItemMonikerFlags record
RIMF_NOT_ENABLED :1
:15
ReplaceItemMonikerFlags end
RIMF_NOT_ENABLED
Ensure that the item we are setting the moniker for will be disabled while visible.
Library: Objects/gDListC.def
ReplaceItemMonikerFrame
ReplaceItemMonikerFrame struct
RIMF_source dword
RIMF_sourceType VisMonikerSourceType
even
RIMF_dataType VisMonikerDataType
even
RIMF_length word
RIMF_width word
RIMF_height word
RIMF_itemFlags ReplaceItemMonikerFlags
RIMF_item word
ReplaceItemMonikerFrame ends
RIMF_source stores a pointer to the source moniker. This pointer may be an optr, hptr, or fptr, depending on the RIMF_sourceType.
RIMF_sourceType defines the type of pointer contained in RIMF_source.
RIMF_dataType defines whether the source is a VisMoniker, text string, graphics string, or GeodeToken.
RIMF_length stores the size (in bytes) of the source. (This value is not used for VMST_OPTR.) If the data type is VMDT_TEXT and RIMF_length is 0, the text is assumed to be null-terminated. If the data type is VMDT_GSTRING and RIMF_length is 0, the length of the gstring is computed by scanning the gstring.
RIMF_width stores the width of the graphics string if the data type is VMDT_GSTRING. If 0, the width of the gstring is computed by scanning the gstring.
RIMF_height stores the height of the graphics string if the data type is VMDT_GSTRING. If 0, the height of the gstring is computed by scanning the gstring.
RIMF_itemFlags stores the item flags for the function.
RIMF_item stores the position of the item whose moniker you’re setting.
Library: Objects/gDListC.def
ReplaceVisMonikerFrame
ReplaceVisMonikerFrame struct
RVMF_source dword
RVMF_sourceType VisMonikerSourceType
even
RVMF_dataType VisMonikerDataType
even
RVMF_length word
RVMF_width word
RVMF_height word
RVMF_updateMode VisUpdateMode
even
ReplaceVisMonikerFrame ends
This structure is used by MSG_GEN_REPLACE_VIS_MONIKER to store the parameters used in that operation.
RVMF_source stores a pointer to the source moniker. This pointer may be an optr, hptr, or fptr, depending on the RVMF_sourceType.
RVMF_sourceType defines the type of pointer contained in RVMF_source.
RVMF_dataType defines whether the source is a VisMoniker, text string, graphics string, or GeodeToken.
RVMF_length stores the size (in bytes) of the source. (This value is not used for VMST_OPTR.) If the data type is VMDT_TEXT and RVMF_length is 0, the text is assumed to be null-terminated. If the data type is VMDT_GSTRING and RVMF_length is 0, the length of the gstring is computed by scanning the gstring.
RVMF_width stores the width of the graphics string if the data type is VMDT_GSTRING. If 0, the width of the gstring is computed by scanning the gstring.
RVMF_height stores the height of the graphics string if the data type is VMDT_GSTRING. If 0, the height of the gstring is computed by scanning the gstring.
RVMF_updateMode stores the visual update mode to define when to show the new moniker.
Library: Objects/genC.def
ReplaceWithGraphicParams
ReplaceWithGraphicParams struct
RWGP_range VisTextRange ;range to replace
RWGP_pasteFrame word ;ptr to frame if quick paste.
;0 otherwise.
RWGP_sourceFile word ;source vm file
RWGP_graphic VisTextGraphic
ReplaceWithGraphicParams ends
Library: Objects/vTextC.def
ReplaceWithHWRData
ReplaceWithHWRData struct
RWHWRD_range VisTextRange <>
RWHWRD_context HWRContext <>
ReplaceWithHWRData ends
RWHWRD_range stores the range to replace. This range may start beyond the end of the text. If so, spaces should be appended to the text.
RWHWRD_context stores the context in which the hand writing recognition data was added.
Library: Objects/gPenICC.def
RequestedViewArea
RequestedViewArea etype byte
RVA_NO_AREA_CHOICE enum RequestedViewArea ;no choice made here
RVA_X_SCROLLER_AREA enum RequestedViewArea ;put with x scroller
RVA_Y_SCROLLER_AREA enum RequestedViewArea ;put with y scroller
RVA_LEFT_AREA enum RequestedViewArea ;put in left area
RVA_TOP_AREA enum RequestedViewArea ;put in top area
RVA_RIGHT_AREA enum RequestedViewArea ;put in right area
RVA_BOTTOM_AREA enum RequestedViewArea ;put in bottom area
Library: Objects/genC.def
RGBDelta
RGBDelta struct
RGBD_red sbyte
RGBD_green sbyte
RGBD_blue sbyte
RGBDelta ends
Library: color.def
RGBValue
RGBValue struct
RGB_red byte
RGB_green byte
RGB_blue byte
RGBValue ends
Library: color.def
RGCFeatures
RGCFeatures record
RGCF_GRID_SPACING :1
RGCF_SNAP_TO_GRID :1
GRCF_SHOW_GRID :1
RGCFeatures end
Library: ruler.def
RowBlockList
RowBlockList struct
RBL_blocks nptr N_ROW_BLOCKS dup (0)
RowBlockList ends
Library: cell.def
RSCCFeatures
RSCCFeatures record
RSCCF_SHOW_VERTICAL :1
RSCCF_SHOW_HORIZONTAL :1
RSCCF_SHOW_RULERS :1
RSCCFeatures end
Library: ruler.def
RSCCToolboxFeatures
RSCCToolboxFeatures record
RSCCToolboxFeatures end
Library: ruler.def
RTCFeatures
RTCFeatures record
RTCF_DEFAULT :1
RTCF_SPREADSHEET :1
RTCF_INCHES :1
RTCF_CENTIMETERS :1
RTCF_POINTS :1
RTCF_PICAS :1
RTCFeatures end
Library: ruler.def
RTCToolboxFeatures
RTCToolboxFeatures record
RTCTF_DEFAULT :1
RTCTF_SPREADSHEET :1
RTCTF_INCHES :1
RTCTF_CENTIMETERS :1
RTCTF_POINTS :1
RTCTF_PICAS :1
RTCToolboxFeatures end
Library: ruler.def
RulerGridNotificationBlock
RulerGridNotificationBlock struct
RGNB_gridSpacing WWFixed
RGNB_gridOptions GridOptions
RulerGridNotificationBlock ends
Library: ruler.def
RulerGuideControlFeatures
RulerGuideControlFeatures record
RGCF_HV :1
RGCF_LIST :1
RGCF_POSITION :1
RGCF_DELETE :1
RulerGuideControlFeatures end
Library: ruler.def
RulerShowControlAttributes
RulerShowControlAttributes record
RSCA_SHOW_VERTICAL :1
RSCA_SHOW_HORIZONTAL :1
:14
RulerShowControlAttributes end
Library: ruler.def
RulerTypeNotificationBlock
RulerTypeNotificationBlock struct
RTNB_type VisRulerType
RulerTypeNotificationBlock ends
Library: ruler.def
RulerViewAttributes
RulerViewAttributes record
RVA_HORIZONTAL :1
:7
RulerViewAttributes end
Library: ruler.def